C# Order Processing ASP.NET Page?
Mar 31, 2011
I am building a ASP.NET page which is an Sales Order Processing Form I have two Last issues that due to my lack of experience in the language I am struggling with hopefully you can help.Issue 1 - I have a field <asp:DropDownList runat="server" ID="txtProduct"></asp:DropDownList> that is pulling from a database table Called Products to populate its options list. I need to automatically pull the SalesPrice value and insert it into the txtUnitAmount field based on the selection of the Product.Issue 2 - Once the form has been filled and there are records in the DataTable I then need to insert all of the rows into the Database table SalesOrders when a user clicks a button.
[code]...
View 1 Replies
Similar Messages:
Mar 18, 2010
We are in the process of building a huge site. We are contemplating on whether to do the processing of HTML at server side (ASP .Net) or at the client side. For example we have HTML files which acts like templates for the generation of tabs. Is it better for the server side to get hold of content section (div) of HTML load the appropriate values and send the updated HTML to the browser or is it better that a chunk of data is passed onto client and make Javascript do the work?
View 2 Replies
Jun 24, 2010
The following code works fine for disabling content page controls, but how do I disable master page controls?
public void DisableControls(Control control,bool isEnable)
{
if (control.HasControls())
{
foreach (Control c in control.Controls)
{
DisableControls(c, isEnable);
}
}
else
{
if (control is IPostBackDataHandler && !(control is IPostBackEventHandler))
{
if (control is WebControl)
{
((WebControl)control).Enabled = isEnable;
}
else if (control is HtmlControl)
{
((HtmlControl)control).Disabled = !isEnable;
}
}
}
}
View 2 Replies
Aug 25, 2010
I have a situation where in, one of the form has to show some processing message on the Page and then automatically redirect to another page.
View 5 Replies
Jun 29, 2010
I have a Button inside an UpdatePanel. How can I lock the page while the Button is clicked?
View 2 Replies
Jan 23, 2010
I have 5 hard corded texboxes in a page in a sequence with sequence Number . Now i want to add re-order /re-arraning functionaly .. but i can't use ajax reorder list because i have 5 hard corded texbox. how can i maintain the order in Insert/Update cases. And also suggest me control that i can use, another than ajax re-order list. coz i not using any list items i have hard corded items on the page.
View 1 Replies
Feb 7, 2011
The AjaxToolkit has a ReorderList. I'm searching for a jQuery solution that does the same and found this page. I would like to change the order of divs (vertically) and upload the new order to the database (ajax).
View 2 Replies
Apr 30, 2010
I have a dynamic website where each page has a selection criteria and a button. When the user clicks on the button it creates an csv file on the remote server and then emails it to the person who is logged in.
I have seen on a lot of sites where the screen goes a dark grey (still being able to see the webpage underneath) and a animated gif in the middle looking like a circular egg timer. Once the processing is complete it goes back to the webpage.
View 29 Replies
Feb 25, 2010
I'm using CustomValidator with Page.IsValid=false but for some reason the FormView control still process the insertion.
View 10 Replies
Sep 18, 2010
My database insertion is working good with normal asp.net page but when it is a content page of master page, stucking me to insert data in database.
take the advantage of SQL Server Profiler to accomplish it, but I don't know anything about sql profiler. I only know about stored procedures but don't know what is sql server profiler?
My Code Behind
[Code]....
View 9 Replies
Jan 19, 2010
We need the ability to send out automatic emails when certain dates occur or when some business conditions are met. We are setting up this system to work with an existing ASP.NET website. I've had a chat with one of the other devs here and had a discussion of some of the issues.Things to note:All the information we need is already modelled in the ASP.NET websiteThere is some business-logic that is required for the email generation which is also in the website alreadyWe decided that the ideal solution was to have a separate executable that is scheduled to run overnight and do the processing and emailing. This solution has 2 main problems:If the website was updated (business logic or model) but the executable was accidentally missed then the executable could stop sending emails, or worse, be sending them based on outdated logic.We are hoping to use something like this to use UserControls to template the emails, which I don't believe is possible outside of an ASP.NET websiteThe first problem could have been avoided with build and deployment scripts (which we're looking into at the moment anyway), but I don't think we can get around the second problem.So the solution we decided on is to have an ASP.NET page that is called regularly by SSIS and to have that do a set amount of processing (say 30 seconds) and then return. I know an ASP.NET page is not the ideal place to be doing this kind of processing but this seems to best meet our requirements. We considered spawning a new thread (not from the worker pool) to do the processing but decided that if we did that we couldn't use the page returned to signify a success or failure. By processing within the page's life-cycle we can use the page content to give an indication of how the processing went.So the question is:re there
View 6 Replies
Nov 14, 2010
I have a html table. i need to search the table dynamically on the key press of search textbox and apply background to TRs.
I have a jquery to do the functionality. but the page is getting hangged for atleast 5 seconds when there is more number of rows.
I have updater inmage to show while preocessing, image is displayed but when the proccessing javascript the image got structed.
View 5 Replies
Feb 10, 2010
When does an event of a master page fire? What is the order of firing events between Master page and Content page in asp.net?
View 1 Replies
Oct 22, 2010
I have two table Order and Order Detail.
What i need is i need to bind last 10 Order in Gridview/details view with paging, and the same order detail also fetch from database and shown in another gridview.. if user click any oderNo in first Gridview/DetailView then i need to show Respective order detail in anther gridview..
without postback coz we already fetch 10 order with orderdetails from the database..and if user click next 10 orderNo using paging then again we need to load 10 orderNo with respective orderdeatils from database like this going on....as well as let me know how to take print of particular oder and order detail....?
View 7 Replies
Mar 3, 2010
1) I know there are lots of web sites that describe in what order events are called during the Asp.Net page life-cycle. But is there also a tool, perhaps Reflector, that would enable me to figure out by myself in what order are ALL the page's events and their event handlers called during the page's life cycle? 2) Would you say that trying to figure out exactly what is going on under the hood is a good idea or a waste of time? To clarify - I'd like to figure out exactly what is going on when a control tree is build - thus all the method calls, all the events called etc needed for control tree to be build ( I imagine there are hundreds or perhaps thousands lines of code written just for building a control tree).
View 4 Replies
Sep 6, 2010
So i want to run a single .net 4 web page in one folder, but there will be older classic asp files in that folder that have to work.
so say i have..
Order (folder)
orderitem.asp
shoppingcart.asp
i want the shoppingcart to work as classi asp (no change)
But i want the order.asp page to be redirected and parameters for that page to redirect to MVC say ordercontroler.. order actionview and have the redirected link as order/order/23420984 from order/orderitem.asp?part=23420984
View 4 Replies
Feb 18, 2010
I was wondering if there was anyway to populate the page with asp.net code like "<asp:Repeater ID="rptProducts" runat="server">MORE_CODE</asp:Repeater>" and then have the server use that code on the page. I'm not sure if i'm making sense. Like writing the asp.net front end code to the page dynamically before the .net engine generates the output html.
View 3 Replies
Jan 11, 2011
I'm trying to use a java servlet in a 3rd party tool's web interface (CA service desk) to invoke it's download file functionality using a webclient in vb.net. The trouble is the text stream from response is markup and not the acutual text file stream.
It's like the page is redirecting to another page which actually presents the file for downloading. I have no idea what the redirected page URL is.
Is there a way I can process this redirected page in order to get at the download using a system.net.webclient?
View 1 Replies
Mar 16, 2010
I want to submit the form with post method, but before that i want to do some processing in CS file, after the processing is done then the form will be submitted in post manner like <form method="post">
View 7 Replies
Oct 6, 2010
I have at text box with a validator control which works fine (prevents letters being entered, only numbers)
However once it displays the error message I am unable to do anything else on the page, links don't work etc. I have to close down the window and start the website agin.
View 3 Replies
Jan 10, 2014
I want to show a processing image on every page load how to do that...Not only in button click it should happen in all page load. It should start when page load starts and ends when page load completed.
View 1 Replies
Apr 24, 2010
From my testing, it appears that the order of parameters for the UpdateParameters must match both the order of the bound fields on the form (asp:Formview), and the order of the parameters in the UpdateCommand. Is that correct? If so, why do the parameters have names if all that matters is the order? I tried both asp:ControlParameter and asp:Parameter. Maybe the more relevant question is why aren't the names used instead of the order, particularly for the form order?
So, given I display the Identity field (CID), and need that for the update, I cannot get the update to work without including it in the UpdateCommand. Of course, since it is an autonumber field in Access, I cannot actually set it. So, I had to add another field to the db (lngUpdateCID) that I could set. That can't be how it has to be done, but I could not figure out another way to do this.
The relevant code is below:
[Code]....
View 23 Replies
Aug 20, 2010
I am able to route my urls to an existing page. Here is how our scenario is currently working:
On Default.aspx, we have several links that link to pdf files on the server. The filenames of these files change dynamically which is why we need the url routing. When the user clicks on of the urls, the link is routed to the getFile.aspx page that has logic in it to determine which file to open.
Is there a way to have the getFile.aspx page to open in the same window as the default.aspx page?
Otherwise, I need for the getFile.aspx page to close after the intended processing is complete, and I've not been able to close it without getting the close window dialog box. I figure if it opens in the same browser window, I can redirect back to the default.aspx page when processing is finished.
View 1 Replies
Aug 2, 2010
We have a very simple ASP.Net page for uploading a file to our webserver. The page has no controls - a client uses it to automatically send us a file each night.
On occasion, the file seems to not get to us, but the client reports that they have sent it.
We added some logging statements to the page, and discovered something quite odd. The page ceases to execute right in the middle of a log statement. No exceptions, just up and dies.
Here is the code-behind:
[code]....
I assume if there was a error in the transmission of the file that either an exception would be thrown from the reader.ReadToEnd() line. And if not an exception, I would expect the page processing to continue but that I may only receive part of the file (in which case it should log something).
The logging statement is only accessing a string variable, and it's inside a try-catch. NLog is the logging component we use, and we access that through the facade provided by the Simple Logging Facade project on Codeplex. So, we trust the logging component to be more or less bulletproof - we certainly don't see anything in our usage of it here that should be causing problems.
Why on earth could this page just up and stop processing like this?
The fact that we get a half-finished logging statement seems to point towards an error being swallowed in the logging system - but that just seems so unlikely - and we have NLog's internal logging on and it is not reporting any problems.
View 1 Replies
Feb 23, 2010
I have devloped a dashboard, which contains different sections. Each section shows a certain user control. some user controls shows graphs and grids and some information after some calculations. Some of these controls take times (10 seconds) to load, that's why whole page take a remarkable time to load.
I wana display skelton of page and some of controls, not taking much time, and display some processing sign on controls taking time more than 5 seconds. and refresh contents of these controls after processing at server done.
View 2 Replies
