Web.config - Missing Required Attribute 'name'

Mar 2, 2010

I am getting an error in my web.config which says missing required attribute 'name' and the following excerpt is displayed:

Code:

20: <handlers>
21: <add path="c1chartimage.aspx" verb="*" type="C1.Web.C1WebChart.ImageHttpHandler,C1.Web.C1WebChart.2" />
22: </handlers>

I am migrating from IIS6 to IIS7, and IIS6 was fine with this. I already made one change (system.web to system.webServer) and I don't know what's wrong with it now.

View 6 Replies


Similar Messages:

MVC :: Missing Compiler Required Member

Feb 24, 2011

I have an MVC 3.0 application which has been upgraded from MVC2.0. It currently has a combination or Razor and the old MVC 2 view engines running in it. I am getting quite frequently during development this error when browsing a razor-based page.

Compiler Error Message: CS0656: Missing compiler required member 'Microsoft.CSharp.RuntimeBinder.Binder.InvokeMember'

[No relevant source lines]

Source File: Line: 0

The error occurs frequently and seems to only affect a certain part of the site at a time. It also only affects pages using the ViewBag syntax so it is definitely the dynamic object stuff breaking. If i compile the project again it eventually goes away. The sporadic nature of the bug is very frustrating

View 2 Replies

Conditional Required Attribute For Validation?

Mar 23, 2010

We're trying to get a conditional attribute to work, case in point, there's a boolean (checkbox) that if checked, its related text is required. So, ideally we'd have something like ...

public bool Provision { get; set; }

[ConditionalRequirement(IsNeededWhenTrue = Provision)]
public string ProvisionText { get; set; }

Is this even possible?

Alternate idea (not as elegant?)
public bool Provision2 { get; set; }
[PropertyRequired(RequiredBooleanPropertyName = "Provision2")]
public string Provision2Text { get; set; }

I'd hate to use the magic string method .

View 1 Replies

MVC :: Required Attribute With Resource Definition Uses Wrong Language

Aug 30, 2010

I'm having a problem with a multilanguage application in MVC. On my model I'm using the following:

[Code]....

This takes care of validation... However the messages are always in the default language. Meaning that the setting of the culture of my thread is occuring too late (I'm currently setting it in my base controller 'OnActionExecuting'). Where could I patch in to change the culture accordingly before validation takes place?

View 5 Replies

DataSource Controls :: Entering Required Attribute To DataColumn?

Sep 20, 2010

i am trying to create a datatable entering the columns that i create before, but i have a problem, the dataColumn doesn't have the required data, there is a AllowDbNull but it doesn't work.

Then i would like to add other restrctions like MinLegth.

Does anybody know how to do this?

View 2 Replies

Security :: Domain Attribute In Web.config Is Unrecognized Attribute 'domain' In Asp.net 1.1

Jan 21, 2011

I am trying to achieve a SSO implimentation across my websites so i am using the machine key attribute to do so.now the trouble starts here as the website the user logs in is on the .net 1.1 framework and the website it it navigating to is .net 4.0.I have share the same machine-key across both the application . It works fine in my testing environment but as i move to the deployment server ,it just dosent work !So what i could do is read this article on MSDN :

http://msdn.microsoft.com/en-us/library/eb0zx8fc.aspx
this tells me to add a domin attribute like below
<forms loginUrl="~Login.aspx" defaultUrl="Default.aspx" protection="All" timeout="80" name=".ASPXAuth" domain="asbc.com"/>
but this thing just dosent work on the 1.1 application and throws an error Unrecognized attribute 'domain'.

Where do i get to mention the domin in my 1.1 application.?

View 3 Replies

Visual Studio :: 2010 Missing Web.config Files?

Aug 9, 2010

I just moved into a new computer running Windows 7 pro, and I installed a new copy of VS2010. Now all of my old sites that I made in VS2008 do not have their web.config files. Does anyone know what happens to them in VS2010, or Windows 7?

View 3 Replies

The Connection Property In The Web.config File Is Missing Or Incorrect?

Nov 10, 2010

I have myConnectionString and it's working fine. In the Server Explorer, the Data Connection is even using myConnectionString to connect to the database. When I created my .dbml, it uses that same yConnectionString. However, now whenever I opened the .dbml file, pops up with the following message:The connection property in the web.config file is missing or incorrect.The connection string from the .dbml file has been used in its place.After this message is display and I clicked okay (because that's the only option), it creates myConnectionString2 in the web.config file with a different ID but no password provided. What is this all about? Why is it creating a second connection string with a different ID?

View 7 Replies

MVC :: Add Parameters Like To The LoginUrl Attribute In The Web.config

Mar 30, 2010

I'm creating a MVC application where the first item in the Url is a parameter (location) - not a controller or action. So my routes look like {location}/{controller}/{action}

There are items that require authorization to access so the person needs to login. But how can I set up my loginurl so that I can reflect this set up : {location}/account/login

It seems you can't add parameters like this to the loginUrl attribute in the web.config, so how would I got about setting something like this up?

View 5 Replies

Batch Debug Attribute In Web.config?

Mar 17, 2010

what exactly the batch debug option in web.config (attribute) does? I can tell it debugs in batches ( >1) but I cannot find anymore background info on this setting.

View 1 Replies

What Changes Are Required In Web.config File To Configure Web Farm

Jul 6, 2010

What changes are required in web.config file to configure Web Farm ?

View 1 Replies

C# - Change Attribute Of Membership Provider Programmatically In Web.Config

Jan 26, 2011

I have the following defaultmembership provider in my web.config

<add name="UmbracoMembershipProvider" type="umbraco.providers.members.UmbracoMembershipProvider" enablePasswordRetrieval="false" enablePasswordReset="false" requiresQuestionAndAnswer="false" defaultMemberTypeAlias="Another Type" passwordFormat="Hashed" />

I am trying to update the enablePasswordReset from false to true programmatically but am struggling.. This is as far as I got!

ConfigurationManager.OpenWebConfiguration(Request.ApplicationPath);
var section = (MembershipSection)config.GetSection("system.web/membership");
var defaultProvider = section.DefaultProvider;
var providerSettings = section.Providers[defaultProvider];
// Now what?

View 2 Replies

Web Forms :: How To Set Attribute As Righttoleft=false; In Web.config File

Mar 2, 2011

I have one web.config in my website.Suppose i have a setting attribute as Righttoleft=false; in web.config file.I have a BasePage.cs all pages are derived from it.I am setting this Righttoleft=false; or true; programatically in Basepage.cs based on some condition and save it to web.config.I have a dropdown and based on the items selected from dropdown, for some items my web.config file saves with Righttoleft=false; and for some it saves with Righttoleft=true;

View 2 Replies

AJAX :: Runat="server" Attribute Is Required For Ajaxcontroltoolkit Controls?

Aug 27, 2010

1)we are calling them as client side controls,then what is the need for runat server attribute?

2)<asp:Button ID="Button1" runat="server" Text="Button" />
<asp:ConfirmButtonExtender ID="Button1_ConfirmButtonExtender" runat="server"
ConfirmText="Really?" Enabled="True" TargetControlID="Button1">
</asp:ConfirmButtonExtender>

when i execute the above code,i observed that in status bar message as "connecting to localhost",if they are client side controls what is the need of going to local server,why it is happening?

View 4 Replies

.net - New Asp "showat" Attribute Required Inconsistently In VS2010. Why

Apr 1, 2010

When I generate code using T4 templates in Visual Studio 2010, I get the following error for each of my asp controls when I try to compile:

Control "ddState" is missing required attribute "showat".

I have never gotten this error in previous versions of .NET. Further, I don't get this error when I manually construct my pages either by dragging/dropping, nor do I get it when I type out the control text myself. When I generate code, I have to manually add showat="client" to my tag for the compiler to be happy. It was my understanding that I never had to explicitly specify this tag. The following:

<asp:dropdownlist id="ddState" runat="server" showat="client" />

solves the problem. Why do I have to add this to generated code but not other times?(It's a VS-2010 webforms project, using VB, in case that makes a difference.)

View 6 Replies

Regular Expression On Web.config Location Path Attribute (with Parameters)?

Jun 30, 2010

Is there any way of doing something like this?

<location path="/(view|edit)post.aspx?id=[7-9][0-9]+">
<system.web>
<authorization>
<allow roles="AdminPublishers"/>
<deny users="*"/>
</authorization>
</system.web>
</location>

Authorization is just an example. I would like to be able to do other things with those locations.

View 1 Replies

DataSource Controls :: Storing Required Field Names In Web.config?

Feb 2, 2010

I am writing an app that has a bit of process flow to it. On the save of a record, I need to check some fields to make sure they are not null. If they are not null, I will update a 'SectionComplete' field to true.

The thing is, I would like to store my fields in the web.config. So, I would like to have a string in the appsettings section that has a list of field names that are required. Then in my method, I would call these fields out and check each one for the specific record id, and then update the database.

I would like to do this in the web.config so we could add/remove columns without having to redeploy.

For example: my required fields are name, id, and phone. For section one to be labeled complete, all of these fields would need to be not null.

web.config would have this entry:

<add key="Stage1Fields" value="name, id, phone"/>

View 4 Replies

Web Forms :: How To Edit 'siteMapFile' Attribute Of SiteMap Provider In Web.config Dynamically

Dec 13, 2010

I want to add/edit available siteMap providers in web.config file from code behind.

I am using the siteMap providers currently in the application web.config in a format given below:

<siteMap>
<providers>
<add siteMapFile="~/App_Themes/MyAppDefault/MySiteMap.sitemap"
name="MyAppDefault" type="System.Web.XmlSiteMapProvider" />
</providers>
</siteMap>

This is allowing my application user to show up a different Site Map as and when the theme is changed.

But when I tried to do the same with the following code I faced with an issue.

configuration = WebConfigurationManager.OpenWebConfiguration("~")
section = CType(configuration.GetSection("system.web/siteMap"), SiteMapSection)
Dim provider As New ProviderSettings()
If Not section Is Nothing Then
provider.Name = txtError.Text
provider.Type = "System.Web.XmlSiteMapProvider"
section.Providers.Add(provider)
configuration.Save()
End If

This code is not allowing a provider.siteMapFile property (provideer is the ProviderSettings object).
As well the maximum possible way I can add a new SiteMap provider in web.config is as follows

<siteMap>
<providers>
<add name="MyAppCustom" type="System.Web.XmlSiteMapProvider" />
</providers>
</siteMap>

If anybody can suggest a way for me to add/edit the 'siteMapFile' attribute of the provider.

View 1 Replies

Roles Authentication Works Using Authorization Attribute But Not Via Authorization In Web.config?

Mar 29, 2011

I am using ASP.NET MVC 3 and am trying to do something that should be really straight forward...

My application uses Forms authentication and that is working perfectly for controllers/actions. For example if I decorate either a controller or an action with the attribute below only members of the administrators group can view them:

[Authorize(Roles="Administrators")]

However I have a folder under the default Scripts folder called Admin. I only want members of the Administrators group to be able to access scripts within this directory so I created a new web.config in the directory with the following inside:

[code]....

However no matter whether a user is a member of the Administrators group or not they receive a 302 Found message and are then redirected to the login page.

If I change the web.config to allow user="*" then it works. It also works if I add an allow users="Username" for a specific user I am testing with.

View 1 Replies

Visual Studio :: Connection Property Error The Connection Property In The Web.config File Is Missing Or Incorrect In VWD 2010?

Apr 18, 2010

When I open an ASP.NET 3.5 project using VWD2010, I get a prompt error message,"The connection property in the web.config file is missing or incorrect.The connection string from the .dbml file has been used in its place."however, my project works successfully.

View 1 Replies

Visual Studio :: Visual Studio 2010 Missing Ajax And No Web.config When Creating New Project?

Sep 28, 2010

when i opened my Visual Studio 2010 i noticed that my ajax tab was missing from my toolbox and ajax control kit too.Then i noticed even that when i create new website, there is no web.config in it and it should be.WHAT IS GOIN ON???? :/

View 13 Replies

Forms Data Controls :: Attribute 'onchange' Is Not A Valid Attribute Of Element 'TextBox'

Mar 31, 2011

<asp:GridView ID="GridView1" runat="server">
<Columns>
<asp:TemplateField>
<ItemTemplate>
<asp:TextBox ID="TextBox1" onchange="calculate()" runat="server" Text="0"></asp:TextBox>
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>

I'm getting this error on the above markup: Message 1 Validation (ASP.Net): Attribute 'onchange' is not a valid attribute of element 'TextBox'.

View 2 Replies

Web Forms :: Getting Error / Unrecognized Attribute 'targetFramework'. Note That Attribute Names Are Case-sensitive

Mar 17, 2011

I have a problem with my web site 1stSigBdeAssn.org. I have made no changes to the site but I now get the following error message:

Parser Error Message:

Unrecognized attribute 'targetFramework'. Note that attribute names are case-sensitive.

Source Error:

[code]....

View 4 Replies

Web Forms :: Attribute 'Master' Not Valid Attribute Of Element 'Control'

Feb 1, 2011

I created a simple Master Page in Visual Studio 2008:

<%@
Master
Language="VB"
CodeFile="MasterPage.master.vb"
Inherits="MasterPage" %>
<!DOCTYPE
html
PUBLIC
"-//W3C//DTD XHTML 1.0 Transitional//EN"

and got green underlined 'Master' with two warning messages: 1.Validation (ASP.NET): This attribute name must be followed byan equal (=) sign and a value. If the value is in quotation marks, the quotation marks must match. 2. Validation (ASP.NET): Attribute 'Master' is not a valid attribute of element 'Control'.How I can get rid of the messages?

View 3 Replies

How To Set "cookieName" Attribute Of The "sessionState" XML Element In Web.config Programatically

Aug 11, 2010

Multiple applications are sharing the same session cookie at the moment and I don't want this to be the case, however, I would like to set the value in code rathr than hardcode a value using the web.config.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved