I have an ASP.Net 3.5 web project. There are lots of images on images folder. apprx. 1.5GB size. Everytime I want to publish the project, it takes 35minutes. I dont want to publish folders. I only want to publish pages. Im using shared web hosting. How can I solve this problem?
View 3 Replies
i have a web project which runs perfectly. but when i publish and run from localhost i get the following error:
Server Error in '/manpowermarketing' Application. Failed to access IIS metabase. Description:
[Code]....
I want to publish my project, and upload it to my host but I don't know how to to do that to convert my codes to .dll to protect it ? to take a copy of my database and upload it to the host and bind it all steps needed to complete that successfully
View 2 RepliesI'm trying to publish my mvc3 project to a web host server, I right clicked my project and selected publish, there i entered the ftp information, VS2010 uploaded the files to the ftp, but when i try to surf to the remote site i get an error "Directory Listing Denied". all guides I found requierd an installation on the web host side, is there no way to just upload the site like in classic asp?
View 2 RepliesI have created a new project by selecting ASP.net Web application. I can run the web application in debug mode.
Then I publish the project, where the service URL is localhost. Site/Application is Default Web Site/TestProject.
I go to IIS 7, under sites->Default Web Site, there is a folder called TestProject. I right click and select Manage folder->browse
But I received an error on the browser:
Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
I can not publish my MVC2 project on my server.
My configuration is: VS 2010, MVC2, IIS 7.0
I have 6 different service clients in one project and as we all know when I debug the WCF client hosts them and all is working great.
If i publish up to my server the site will run but i keep getting this error after login.
There was no endpoint listening at http://localhost:8731/Design_Time_Addresses/CISS.Services/SecurityService/ that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.
This is suppose to be easy to publish your site correct? what settings do I need in VS 2010 and what is required on IIS 7.0 to get it to work?
I would like to publish our MVC project to the server where we want to put our mvc website via ftp.
If we manually do this by an ftp connection, it works fine. But we wanted to do it also by the publsh option in Visual Studio 2010. But when we do this we got the following error.
[Code]....
I want to publish an asp.net 4.0 project to a hosting site. I uploaded the three SiteMaster files and the three default files. It has an error on the first line of the SiteMaster.aspx. The error message was "Could not load type 'PorjectName.SiteMaster'." What files should I upload?
View 5 Replies I'm migrating from the website model to the web project model. In the past I used ssl/ftp (server is IIS7) to upload a website. The host (DiscountASP.NET) using VS2008 Publish to upload a project. VS2008 displays the alert that the password will pass in the clear. So ... what is the best practices approach to publishing a project?
1. SSL/FTP (not sure of the implications re: site compilation)
2. VS2008 Publish
3. VS2008 Web Deployment Projects
Why I don't have publish or add a deployment project in my visual studio express 2008?
View 7 RepliesI'm working on different windows machines and virtual windows machines on a mac. I have a project wich uses SQL server and AD for autentication.
Right now I have to be connected to VPN so that the asp.net web application can connect to AD using LDAP string to autentivate users, I also have the SQL server on the other side of the VPN connection.
Is there any way to setup my enviroment so that I can work locally without the AD, and on a local SQL server and be able to publish the project without manually changing the web.config file?
msbuild /t:publish [use PublishProfileName] someproject.csproj
View 2 RepliesI would like to create a script that does some actions, then publish the site to the production, and then runs another script.Is that possible in VS2010?
View 2 RepliesWhen I turn on Code Coverage in my test settings, on a project that references the Unity DI container I get the following error:
Cannot initialize the ASP.NET project'{Project Name}'.
The event log specifies the following reason:
Could not load file or assembly 'Microsoft.Practices.Unity, Version=2.0.414.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. Strong name signature could not be verified.
I have downloaded a project from the internet called the SMS Source example. I wanted to open this project in VS2010, so a conversion wizard has popped up prompting for the conversion. But it has errors in converting.
Error msg:
Conversion Report - SMSSend.csproj:
Error converting project file. MSB0001: Internal MSBuild Error: Missing resource 'MissingAttribute'
On the Timelog page, I want to put 2 dropdown list: 1 Manufacturing Project, 1 Engineer Project. However, users can choose either Manufacturing project dropdown or Engineer project dropdown (not both).
View 4 RepliesI'm trying create unit testing for an existing website project (not web application project). I cannot access my under test classes unless I use accessor. However, if I use accessor, I have problem to initiate an object with passing arguments. I only want to create unit tetsing for App_Code. After searching web, and I found that I'd better to create a web application project using my current existing website project. From solution explorer, add new project ->using existing website. My questions is: what impact will have for my current website to create the new project? Should I just convert my current website to web application? If do that, will it cuase problems on my website? I am new on asp.net, still learning..
View 1 RepliesWe are upgrading .Net 2.0 Framework Web service project to .Net 3.5 Project. We are not changing any methods. Will there be any change in the proxy because of this Framework Upgrade.My requirement is to all the existing clients consuming this webservice should not have any impact due to this framework upgrade.
View 1 RepliesApproximate cost of the project Duration of the project ( There are 2 Developers ) Can I charge the client for software license ( like Visual Studio license since I have purchased it by paying a hefty amount)
My profile as a developer is as follows:
I am a C#, .net, ASP.net developer with 3 years experience in enterprise class web and desktop projects. I can work 20 hours a week
The brief requirements of the project are as follows::
I have to develop an Ecommerce website. The website is meant for buyers, sellers, advertisers and bidders ( I would say it is Business to Business and also Business to Customer site ) The HTML's will be given by the client. The website will have all the features of any Ecommerce site like buying products, selling them, searching products, sorting them,etc The website should conform to W3C standards
I just converted an ASP.NET Web Site Project to a Web Application Project in VS 2010. After I run the application though it seems that my class polymorphism broke. I don't have a clue as to why this could occur.
So in the following code when I call base.OnLoad(e) I am getting errors in the base class because the variable myString is null. In fact all the variables for the Base class are null. I can do
[code]....
Let's say I have a Visual Studio solution with a Web project, a BLL project, and a DAL project. I'm trying to follow the repository pattern keeping my SQL code in the DAL with an interface that is referenced by the BLL.
I have a handful of common solutions for things such as error handling, usage logging, and other things that can be considered utility functions (i.e. not in the business spec). I'm keeping these in a Common project.
Here are a few ideas I've had with regards to structuring the Common project...
Bundle SQL with logic in a given class
Create a layered solution within the Common project
Discard the Common project and put utility functions in with BLL/DAL
Is one of these ideas better/worse than the other? Does anyone have a better solution?
It's worth noting that these utility functions will be reused in a variety of other applications.
Taken from http://msdn.microsoft.com/en-us/library/dd410597(VS.100).aspx ...
If you are using the Standard or Express editions of Visual Studio, the Create Unit Test Project dialog box is not displayed. Instead, the new MVC application project is generated without a test project.
I have created 2 projects in a solution. One project contains Asp.net classes with login page and different other pages.
Another project contains a web service.
When I launch the solution(click F6 in visual studio 2008) the login page can access to the method of the webservice. Both projects are launched.
However when i added this 2 projects into IIS and deploy them (with create command) the login page cannot contact the method of the web service. Even though the web service is running because i can acces it manually. But they cannot communicate each other.
I recently updated my VS2010 website project from .NET 3.5 to 4.0. Everything was working fine in the website project. Today I decided to migrate the website to a web application project as I have learned this is the best way to work in .NET. I split out all my class files into a separate class library and copied all my other content into my new project. Then I updated all the references and web.config.
When I build the class library, everything works great. The problem is happening when I try to build/debug the web application project. It is acting like all the controls are missing and it is also throwing a bunch of compile errors about the public properties I have in my master pages.
Control errors: "The name 'INSERT CONTROL NAME HERE' does not exist in the current context"
Master page errors:'System.Web.UI.MasterPage' does not contain a definition....
It is giving these errors for every single control and master page property in my entire solution.I notice when I add a new web.form to this project, it also adds a filename.aspx.designer.cs file in addition to the .aspx and .aspx.cs file. My existing files do not have these extra files since they were created in a different .NET version.
UPDATE: It seems I was missing the step where I need to right click on the new application folder and select "Convert to web application". I just did that and it seems to be a little bit better...
Now it is choking on Literals that are inside single quotes:
<div class='<asp:Literal ID="CssClassLiteral" runat="server"></asp:Literal>'>
It doesn't see this literal when it does the conversion... Is the above valid code or should I implement that functionality another way?
I have convert Classic ASP Project into .Net,
Now my requirement is that i have to give One link for Access Classic ASP Project.
For that I want link like
[URL]
Here [URL] is a virtual directory created for .Net Page. Now inside that i need to create one folder "OLDSITE" and inside oldside i need to put classic asp page.
How can i set virtual directory for classic asp page.
